Samsung SyncMaster 2220LM - Page 30

frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-
Window, you need to make the X86Config file, which is a type of system setting file.
1.Press Enter at the first and the second screen after executing the X86Config file.
2.The third screen is for
setting your mouse
.
3.Set a mouse for your computer.
4.The next screen is for
selecting a keyboard
.
5.Set a Keyboard for your computer.
6.The next screen is for
setting your monitor
.
7.First of all, set a
horizontal frequency
for your monitor. (You can enter the frequency
directly.)
8.Set a
vertical frequency
for your monitor. (You can enter the frequency directly.)
9.Enter the
model name of your monitor
. This information will not affect the actual execution
of X-Window.
10.You have
finished
setting up your monitor.
Execute
X-Window after setting other requested hardware.