Samsung SyncMaster 225MW - Connecting DVD;DTV Set Top Box; Connecting HDMI; Connecting Using a DVI to HDMI Cable

3. Connecting DVD/DTV Set Top Box
Connect to the DVD/DTVSet Top Box input if the device has a DVD/DTV connector.
You can watch Component simply by hooking up the Component with the monitor as long as the power is
on.
1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the
R-AUDIO-L
port of the monitor.
2. Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the P
R, PB,Y input ports using a
component video cable (P
R, PB,Y).
3. Select Component using the
SOURCE
.
4-1. Connecting HDMI
You cannot connect a PC to the
HDMI IN
terminal.
1. Input devices such as digital DVD are connected to the
HDMI IN
terminal of the monitor using the
HDMI cable.
2. Then, start the DVD with a DVD disc inserted.
3. Select HDMI using the
SOURCE
button.
4-2. Connecting Using a DVI to HDMI Cable