•
MagicInfo
•
TV
Note
MagicInfo supports the CXN-2 model only.
Picture
Size
You can switch the Size.
Press the
TOOLS
button to display the Tools menu. You can also set the size by
selecting Tools → Picture Size.
1. Auto Wide
Automatically adjusts the picture size to the "16:9" aspect ratio.
2. 16:9
Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
3. Wide Zoom
Magnify the size of the picture more than 4:3.
4. Zoom
Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
5. 4:3
Sets the picture to 4:3 normal mode.
6. Screen Fit
Use the function to see the full image without any cutoff when HDMI (720p/1080i/
1080p), Component (1080i / 1080p) signals are input.
Note
Wide Zoom : Press the button to Select Position, then press the ENTER button.
Press the or button to move the picture up / down. Then press the ENTER button.
Zoom : Press the button to Select Position, then press the ENTER button. Press
the or button to move the picture up and down. Then press the ENTER button.
Press the button to Select Size, then press the ENTER button. Press the or button
Adjusting the LCD Display
89
To Next Page
Loading...
