9. Enter the model name of your monitor. This information will not affect the actual
execution of X-Window.
10. You have finished setting up your monitor. Execute X-Window after setting other
requested hardware.
MDC (Multi-Display Channel)
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MDC installation file.
Note
If the popup window to install the software for the main screen is not displayed,
proceed with the installation using the MDC executable file on the CD.
3. When the Installation Shield Wizard window appears, click "Next".
4. Select "I agree to the terms of the license agreement" to accept the terms of use.
5. Click "Install".
6. The "Installation Status" window appears.
7. Click "Finish".
8. When the installation is complete, the MDC executable icon appears on your desk-
top. Double-click the icon to start the program.
MDC execution icon may not appear depending on specification of computer
system or monitor. If that happens, press F5 Key.
Installation Problems
The installation of MDC can be affected by such factors as the video card, motherboard
and the network environment.
Uninstall
The MDC program can be removed only by using the "Add or Remove Programs" option
of the Windows
®
Control Panel.
Perform the following steps remove MDC.
Using the Software
46
To Next Page
Loading...
