Samsung SyncMaster 400PX - Page 103

Safety Screen
The Safety Screen function is used to prevent afterimages that may appear when a still picture is
displayed on the screen over a long time.
- The Screen Scroll function scrolls the screen for the specified period of time.
- This function is not available when the power is turned off.
z
Interval
z
Second
z
Type
Video Wall
This offers a function that enables you to use several monitors as one screen.
First, select the button that sets the number of monitors to be used and their allocation. The allocation
figure will appear as a selectable button on the side.
For example, when you choose 2*2, selectable buttons in the form of 2 rows and 2 lines appear, and if
you select number 3 in this matrix, the third screen of the output screen divided by 4 will show up in
the monitor.
- The MDC program supplied by Samsung supports over 4*4.
z
1*2
z
2*1
z
2*2
z
3*3
z
4*4
z
1*5
z
5*1
z
OFF
z
Format - Full, Natural
Safety Lock
z
Safety Lock ON/OFF
Schedule OSD MDC OSD Message OSD
Message OSD
When entering a message to the server and setting the options needed before sending it, the message
is displayed on the selected client monitor.
Unavailable while the source is being displayed.
The Transparent Ticker is only available when the client is in Landscape mode.