Introduction
to MagicNet
|
Schedule
Setting
|
Function
Setting
|
Basic
Setting
|
Remote Control
Adjustment
| Troubleshooting | Specifications
Specifications
Supported File Format Spec
File Format Resolution
Bit rate
Audio
Sampling
rate
CBR VBR
Video
MPEG1
1280x720 or
less
12Mbps or less
Peak bitate
12Mbps or less
WMV -
Audio MP3 - Available Not Available
16kHz or
more
Photo
JPEG
2274 x 1704
or less
- - -
BMP - - -
For JPEG, the EXIF Format (Digital Camera) is not supported.
(However, Samsung digital cameras are supported)
An Office file may take some time to be displayed on the monitor, depending on the file size.
For movies, only the WMV and MPEG1 codecs are provided by default.
You can install and use other needed codecs except for WMV and MPEG1. (Optional)
However, the compatibility of the codec may not be guaranteed depending on the codec.
Network Configuration (Number of Devices)
Bit rate Normal Max
Video
4Mbps 10 20
6Mbps 8 16
12Mbps 5 9
Audio, Photo - 20 or more -
Server PC Environment: Recommended (CPU: 3GHz, RAM:512M, Ethernet: 100M)
Network Environment: Local network not connected externally
Normal: Server PC network bandwidth: 50% ~ 60%
Max: Server PC network bandwidth: 90% or more (not recommended)
For a LAN-connected environment, the connectable number of devices may be reduced depending on
the availability of neighboring networks.
Server System Configuration
CPU RAM Ethernet OS Application
Minimum P1.8Ghz 256M
100M/1G
Windows XP
Windows 2000
(Service Pack 4)
WMP 9 or later
Recommended P3.0Ghz 512M
Local Device (USB) Connection Speed
For a mass storage device such as a USB hard disk, it takes approximately 3 - 4 seconds for loading 1 GB.
When the user operates MagicNet while the file is loading, a warning message is displayed.
Local Device (USB) compatibility
HID(Human Interface Devices)
: Keyboard, Mouse
To Next Page
Loading...
