Sharpness
MENU →
→ ENTER → [Picture] → → ENTER → [Custom] → → → ENTER →
[Sharpness]
→ , → ENTER
Adjusts the Sharpness.
Color Tone
MENU → → ENTER → [Picture] → → →ENTER → [Color Tone]
→ , → ENTER
The color tones can be changed.
(Not available in Dynamic Contrast mode of On.)
1. Off
2. Cool
3. Normal
4. Warm
5. Custom
Note
If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled.
If you set the Color Tone to Off, the Color Control function is disabled
Color Control
Adjusts individual Red, Green, Blue color balance.
MENU → → ENTER → [Picture] → → → → ENTER → [Color Control]
(Not available in Dynamic Contrast mode of On.)
Note
If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom
mode.
Adjusting the LCD Display
To Next Page
Loading...
