Why does the Samsung SyncMaster 400UX-3 remote control not work?
The remote control might not function if the RS-232C cable is disconnected, or the program closes unexpectedly while the Remote Control function is disabled. To fix this, restart the program and enable the Remote Control setting.
What to do if displays power on/off at different times on Samsung Monitor?
If displays power on or off at different times, even with On Time or Off Time set, synchronize the connected displays by adjusting the time on the PC.
How to fix a Samsung SyncMaster 400UX-3 Monitor when the display doesn't appear on the system information chart?
First, check the RS232C cable connection, ensuring it's properly connected to the correct serial port. Next, verify that no other display is connected with a duplicate ID, as this can cause data collision. Finally, confirm that the display ID is within the range of 0 to 99 by changing the ID in the Display menu if necessary.
What to do if the display I want to control does not appear on the other Control Info Grids on Samsung SyncMaster 400UX-3?
First, verify that the display is powered on by checking the power status in the system information chart. Then, make sure you have selected the correct input source to which the display is connected.
Why does my Samsung SyncMaster 400UX-3 Monitor display not appear on the system information chart?
If the display you're trying to control isn't showing up on the system information chart for your Samsung Monitor, here are a few things to check: * Make sure the RS232C cable is properly connected to the correct serial port. * Ensure that no other display is connected with a duplicate ID, as this can cause data collision. * Verify that the display ID is within the range of 0 to 99. You can change the ID in the Display menu.
What to do if the Samsung SyncMaster 400UX-3 display doesn't appear on the Control Info Grids?
If the display you want to control does not appear on the other Control Info Grids of your Samsung Monitor, make sure that the display is powered on (check the power status in the system information chart) and that you have selected the input source the display is connected to.
How to synchronize power on/off times on Samsung Monitors?
If your Samsung Monitor displays are powering on or off at different times, even though the On Time or Off Time is set, adjust the time on your PC to synchronize the time between the connected displays.
To Next Page
General