→ , → ENTER
Multi Control
Available Modes
•
PC / DVI / BNC
•
AV
•
Component
•
HDMI
•
MagicInfo
Note
• MagicInfo can only be enabled when a network box is connected.
•
The
HDMI port and network box cannot be connected at the same time.
Multi Control
Assigns an individual ID to the SET.
MENU → → → → → ENTER → → ENTER
→ , → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use
to
select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
Adjusting the LCD Display
To Next Page
Loading...
