1) POWER IN
The power cord plugs into the LCD Display and
the wall plug.
2) REMOTE OUT/IN
You can use a wired remote control by
connecting it to your monitor.
3) RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
4) DVI / PC / HDMI IN [HDMI/PC/DVI/BNC
AUDIO IN](HDMI/PC/DVI/BNC Audio
Connection Terminal (Input))
5) DVI / PC / HDMI IN [HDMI]
Connect the HDMI terminal at the back of your
monitor to the HDMI terminal of your digital
output device using a HDMI cable.
6) DVI / PC / HDMI IN [RGB] (PC Video
Connection Terminal)
Using a D-Sub Cable (15 pin D-Sub) - PC
mode (Analog PC)
7) DVI / PC / HDMI IN [DVI(HDCP)] (PC
Video Connection Terminal)
Using a DVI Cable (DVI-D to DVI-D) - DVI
mode (Digital PC)
8) COMPONENT AUDIO IN [L-AUDIO-R]
(Component Audio Connection Terminal
(Input))
9) BNC/COMPONENT OUT [R/P
R
, G/Y, B/P
B
,
H, V] (BNC/Component Connection
Terminal (Output))
BNC (Analog PC) Connection: connecting the R,
G, B, H, V ports
To Next Page
Loading...
