Samsung SyncMaster 700TSn - Page 69

Specification
1. Each value should be gradually set in "Delay Touch Settings" after fulfillment of "Enable Delay Touch". "Delay" is set to 40 and
"Area" to 16.
2. Enter count
It means how many times you click to approach the setting value within 3 seconds. Then driver will install the function of "False
touch rejection" where quick click or scratch will be considered void except the touch point on the active area for quite a while.
3. Leave count
"False touch rejection" is no longer effective when the click times within 5 seconds is less than the setting number.