Overview | Installation | OSD Mode |
Color
Calibration
| Uninstall | Troubleshooting
Troubleshooting
Check when MagicTune does not function properly.
* MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play.
z MagicTune may not work in case monitor is replaced or driver of graphic card is updated while
MagicTune is operating. If so, please restart the system.
z Visit the MagicTune website for technical support for MagicTune, FAQs (questions and answers) and
software upgrades.
* To check whether your PC is available for MagicTune feature, follow the
steps below (When Windows is XP);
Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager ->
Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new
Hardware.
To Next Page
Loading...
