Samsung SyncMaster 933HD - Plug and Play

English-3
Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
Preset N : Connecting the mains and antenna.
1. Press the POWER button on the remote control.
You can also use the N POWER P button on the TV.
The message N You can set the menu Language. is displayed.
2. Press the ENTER E button. Select the appropriate language by
pressing the ▲ or ▼ button. Press the ENTER E button to conrm
your choice.
3. Press the ◄ or ► button to select Store Demo or Home Use, then
the ENTER E button.
We recommend setting the TV to N Home Use mode for the best
picture in your home environment.
Store Demo N mode is only intended for use in retail
environments.
If the unit is accidentally set to N Store Demo mode and you
want to return to Home Use (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press
and hold the MENU button on the TV for 5 seconds.
4. Press the ENTER E button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER E
button to conrm your choice.
5. Press the ▲ or ▼ button to select Air or Cable, then press the ENTER E button.
Air • : Air antenna signal.
Cable • : Cable antenna signal.
6. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER E button to select Start.
When setting the antenna source to N Cable, a step appears allowing you to set a value for the digital channel
search.
Digital & Analogue N : Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
The channel search will start and end automatically. N
Press the N ENTER E button at any time to interrupt the memorization process.
After all the available channels are stored, the message N Set the Clock Mode. is displayed.
7. Press the ENTER E button. Press the ▲ or ▼ button to select Auto, then press the ENTER E button.
If you select N Manual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically. If not, select N Manual to set the clock.
8. The description for the connection method providing the best HD screen quality is displayed. Check the description
and press the ENTER E button.
9. The message Enjoy your TV. is displayed. When you have nished, press the ENTER E button.
If you want to reset this feature... ❑
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER E
button.
2. Press the ENTER E button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN number, use the N Change PIN function.
The N Plug & Play feature is only available in the TV mode.