1. R - AUDIO - L
: Connect the port of the DVD, VCR (DVD / DTV
Set-Top Box) to the R-AUDIO-L port of the monitor.
2. P
R
, P
B
,Y
: Connect the VIDEO OUT port of the DVD / DTV
Set-Top Box to the P
R
, P
B
,Y input ports using a
component video cable (P
R
, P
B
,Y).
5. ANT IN
!
Connect the CATV cable or TV antenna cable to the
"ANT IN" port on the rear side of the monitor. Make
sure to use a TV antenna cable (sold separately) as
the antenna cable.
6.
!
The Kensington lock is a device used to physically
fix the system when using it in a public place.
(The locking device has to be purchased
separately.)
For using a locking device, contact where you
purchase it.
7. / S-VIDEO / VIDEO / L - AUDIO - R
1. Connect your headphones to the Headphone
connection terminal.
2. S-VIDEO / VIDEO
: Input devices such as DVD, VCR or Camcorder
are connected to the VIDEO or S-VIDEO terminal of
the monitor using the Video or S-Video cable.
3. L - AUDIO - R
: Connect the port of the DVD, VCR (DVD / DTV
Set-Top Box) to the L - AUDIO - R port of the
monitor.
See Connecting the monitor for further information regarding cable connections.
Remote Control
The performance of the remote control may be affected by a TV or other electronic device operated near
the monitor, causing malfunction due to interference with frequency.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
