Samsung SyncMaster 941MW - Connecting to Computer and Devices

Connecting the monitor
1.Connectin
g
to a Computer
1. Connect the power cord for your monitor to the POWER on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Use appropriate connection for your computer.
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the RGB port on the back of your monitor.
[RGB]
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI cable to the DVI(HDCP) port on the back of your monitor.
[DVI(HDCP)]
3. Connect the AUDIO port on the rear side of the monitor to the sound card of the PC.
4. Turn on both your computer and the monitor.
2. Connecting to a Macintosh
Downloaded from ManualMonitor.com Manuals