Samsung SyncMaster B1930HD - Anynet+ (HDMI-CEC)

3-7 Using the Product
3-7 Anynet+ (HDMI-CEC)
What is <Anynet+>?
<Anynet+> is a function that enables you to control all connected Samsung devices that support <Anynet+> with your Samsung
TV‘s remote. The <Anynet+ > system can be used only with Samsung devices that have the <Anynet+> feature. To be sure your
Samsung device has this feature, check if there is an <Anynet+> logo on it.
Connecting Anynet+ Devices
1. Connect the [HDMI(DVI) IN] jack on the TV and the HDMI OUT jack of the corresponding <Anynet+> device using an HDMI
cable.
2. Connect the [HDMI(DVI) IN] jack of the home theatre and the HDMI OUT jack of the corresponding <Anynet+> device using
an HDMI cable.
• Connect the Optical cable between the [DIGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio Input
on the Home Theatre.
• When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theatre‘s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
[DIGITAL AUDIO OUT (OPTICAL)] jack on the DVD / Satellite Box ( i.e. Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
• Connect only one Home Theatre.
• You can connect an <Anynet+> device using the HDMI cable. Some HDMI cables may not support <Anynet+>
functions.
• <Anynet+> works when the AV device supporting <Anynet+> is in the Standby or On status.
• <Anynet+> supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type.
<Anynet+> Menu
The <Anynet+> menu changes depending on the type and status of the Anynet+ devices connected to the TV.