3-1 Using the Product
3 Using the Product
3-1 Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the [POWER ] button on the remote control.
• You can also use the [ ] button on the TV.
2. Press the ▲ or ▼ button to select the language, then press the [ ] button. The message <Select 'Home Use' when
installing this TV in your home> is displayed.
3. Press the
◄ or ► button to select <Store Demo> or <Home Use>, then the [ ] button.
• We recommend setting the TV to <Home Use> mode for the best picture in your home environment.
• <Store Demo> mode is only intended for use in retail environments. If the unit is accidentally set to <Store Demo>
mode and you want to return to <Home Use> (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the [ MENU ] button on the TV for 5 seconds.
4. The message <Check antenna input.> is displayed with <OK> selected. Press the [ ] button.
5. Press the ▲ or ▼ button to select <Air>, <STD>, <HRC>, or <IRC>, then press the [ ] button.
6. Press the [ ] button to select <Start>. The TV will begin memorizing all of the available channels.
• To stop the search before it has finished, press the [ ] button with <Stop> selected.
7. The Clock Set menu is displayed. Press the ◄ or ► button to move to the <Month>, <Day>, <Year>, <Hour>, <Minute> or
<am/pm>. Set the <Mont
h>, <Day>, <Year>, <Ho
ur>, <Minute> or <am/
pm> by pressing the
▲ or ▼ button. Press the [ ]
button.
• You can set the month, day, year, hour, and minute directly by pressing the number buttons on the remote control.
8. The message <Enjoy your TV.> is displayed. When you have finished, press the [ ] button.
If you want to reset this feature...
1. Press the [MENU] button to display the menu. Press the
▲ or ▼ button to select <Setup>, then press the [ ] button.
2. Press the [ ] button again to select <Plug & Play>.
The <Plug & Play> feature is only available in the TV mode.
To Next Page
Loading...
