3-4 Using the Product
MENU DESCRIPTION
Anynet+ (HDMI-CEC) To use the <Anynet+> Function, <Anynet+ (HDMI-CEC)> must be set to On.
When the <Anynet+ (HDMI-CEC)> function is disabled, all the < Anynet+> related operations
are deactivated.
Auto Turn Off
Setting an <Anynet+> Device to turn Off automatically when the TV is turned off.
The active source on the TV remote must be set to TV to use the <Anynet+> function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned
off. If an external device is still recording, it may or may not turn off.
Searching Connec-
tions
The message <Configuring Anynet+ Connection...> is displayed.
When searching devices completes, the connected devices are listed in the Anynet+ menu.
To Next Page
Loading...
