Using the product 3-7
ECO
<Eco Icon Display>
If the <Eco Icon Display> option is <On> and the <Eco Motion Sensor> and <Eco Light Sensor> are
active, a pop-up guide will appear showing the operation status of the sensors.
• The <Eco Motion Sensor> will activate power-saving mode if it is set to on and does not detect
any movement for a specified time.
• A 10-second countdown timer will start along with the above picture before the power-saving
mode activates showing the operation status of the <Eco Motion Sensor>.
• If the screen brightness is adjusted according to the ambient light intensity when the <Eco Light
Sensor> is on, a pop-up as shown above will appear showing the adjusting screen brightness.
• When the screen becomes brighter as the ambient light becomes brighter and the <Eco Light
Sensor> activates, the brightness slide bar level will increase with a sun image displayed above
the bar. When the screen becomes darker, the brightness slide bar level will decrease with a
moon image displayed above the bar. The brightness slide bar will be displayed for three seconds
after the sensor activates.
A pop-up as shown above will appear when an energy tree completes while <Eco Icon Display> is
<On>.
If the above picture is displayed, it means the <Eco Icon Display> option is <On>. Change this
setting to <Off> if you do not want to display the pop-up.
Menu Description
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
