30
Using "MHL(Mobile High-Definition Link)"
2
2 Using "MHL(Mobile High-Definition Link)"
2.1.2 Disabling "MHL"
Disabling MHL by using the [MHL] button
When MHL is active, press the [MHL] button. The MHL function will be disabled.
The input source changes automatically only when a cable is connected to a port other than [HDMI 2 /
MHL].
When the cable is disconnected or the mobile device is powered off
If the MHL cable is disconnected or the mobile device is powered off when MHL is active, the MHL
function will be disabled.
If the MHL cable is disconnected, the product will display the message Check Signal Cable and
remain in MHL mode.
The indicated time 3 seconds (the waiting time before the MHL screen appears) may vary
depending on the mobile device.
To Next Page
Loading...
