Need help?Do you have a question about the Samsung T1 and is the answer not in the manual?
General| Type | Portable SSD |
|---|---|
| Interface | USB 3.0 |
| Capacity Options | 250GB, 500GB, 1TB |
| Encryption | AES 256-bit hardware encryption |
| Weight | 30g |
| Sequential Read Speed | Up to 450 MB/s |
| Sequential Write Speed | Up to 450 MB/s |
| Compatibility | Windows, Mac, Android |
Samsung reserves the right to change product information without notice; provided on an "AS IS" basis.
Material is copyrighted by Samsung Electronics; unauthorized reproduction is prohibited.
Identifies Samsung Logo and other trademarks; all belong to respective owners.
Troubleshooting steps for when the T1 SSD is not detected by the computer.
Explains initial 128MB display and how to achieve full capacity after activation.
Clarifies initial files are activation software; full capacity is accessible after activation.
Details minimum OS requirements (Windows 7+, Mac OS X 10.7+) for T1 activation software.
Forgetting password makes data inaccessible; requires factory reset, deleting all data.
If password is forgotten, factory reset via Samsung Service Center is needed; backup recommended.
Instructions on how to change the T1 password via the setup management screen on Windows or Mac.
Guides on enabling the password security feature from the T1 setup management screen.
Explains how to disable the password security feature from the T1 setup management screen.
How to view the full capacity after completing the activation process by entering the password.
Explains slight capacity differences due to PC drive formatting and calculation methods.
Confirms T1 can be used on devices like smart TVs but is optimized for Windows/Mac OS.
Addresses recognition issues and limitations when connecting T1 to non-PC devices.
To Next Page