Samsung T3 User Manual

Installation manual for Samsung SSD T3 drive
FOR PC WITHOUT ADMIN-RIGHTS
1. Insert the Samsung SSD T3 in a free USB-port
2. The Samsung SSD T3 driver will be installed, please wait until you see a message on the lower
right corner of your screen that says: “Your device is ready to use”
3. Click the “START” button
4. Scroll down and click on “All Programs” and then on “Novell Zenworks”
5. Click on “Zenworks Application Window”
6. Click on Utilities
7. Doubleclick on Samsung T3 Security Enabler
8. Wait until you see the following Welcome screen:
9. Click “Next”
1

Samsung T3 Specifications

General

Read speed	- MB/s
SSD capacity	500 GB
Certification	CE, BSMI, KC, VCCI, C-tick, FCC, IC, UL, TUV, CB, EAC
Product color	Black, Silver
Housing material	-
Security algorithms	256-bit AES
Package type	Box
Quick start guide	Yes
USB version	3.2 Gen 2 (3.1 Gen 2)
USB connector	Micro-USB B
Thunderbolt technology	No
Sustainability certificates	RoHS

Weight and Dimensions

Depth	10.5 mm
Width	74 mm
Height	58 mm
Weight	51 g

Summary

Installation for PC without Admin Rights

Zenworks Application Access

Navigate Zenworks to find and launch the Samsung T3 Security Enabler application.

Initial Setup and Password Entry

Configure initial settings via the welcome screen and set a password for data protection.

Password Loss and Security Advice

Information on handling password loss, device lockout, and best practices for strong passwords.

Installation for PC with Admin Rights

Setup Wizard and Installation

Insert SSD, locate the drive, and launch the setup executable for installation.

License Acceptance and Setup Completion

Review and accept the End User License Agreement to proceed with the installation.

Post-Installation Password Setup

Set a password for the SSD using the newly installed application icon on the desktop.

Password Management and Security Tips

Guidance on password loss, device lockout, and best practices for strong passwords.