English - 14
Changing the Input Source
Source
Use to select TV or an external input
source such as a DVD player / Blu-
ray player / cable box / STB satellite
receiver.
■ TV / HDMI/DVI / AV / Component
1. Press the SOURCEE button on
your remote.
2. Select a desired external input source.
✎
You can change the view mode among the All
and Connected by pressing l or r button.
✎
You can only choose external devices that are
connected to the TV. In Source, connected
inputs will be highlighted.
Edit Name
Edit Name lets you associate a device name to
an input source. To access Edit Name, press the
TOOLST button on your remote when the Source
list is displayed. The following selections appear
under Edit Name:
■ VCR / DVD / Cable STB / Satellite STB / PVR
STB / AV Receiver / Game / Camcorder / PC
/ DVI PC / DVI Devices / TV / IPTV / Blu-ray
/ HD DVD / DMA: Name the device connected
to the input jacks to make your input source
selection easier.
✎
If you connect a PC to the HDMI (DVI) port
with an HDMI cable, assign PC to HDMI/DVI in
Edit Name.
✎
If you connect a PC to the HDMI (DVI) port
with an HDMI to DVI cable, assign DVI PC to
HDMI/DVI in Edit Name.
✎
If you connect an AV device to the HDMI (DVI)
port with an HDMI to DVI cable, assign DVI
Devices to HDMI/DVI in Edit Name.
Information
You can see detailed information about the selected
external device.
SOURCE
[TC310-ZD]BN68-04796H-01L02.indb 14 2013-04-19 �� 4:02:05
To Next Page
Loading...
