※DonotremovethebatterywhileupgradingFirmware.
3)Insert the Micro SD card that has the firmware files.
4) After turning on the camera, you can see the firmware upgrade display menu as below.
※[Currentversion(??????)]→[Upgradeversion(008304)]
Thecurrentversionmaydifferentforeachcamerasbasedonsalesregion.
5) Press the Shutter button.
(After pressing the shutter button, firmware upgrade will be start automatically.
※Afterfinishingupgradefirmware,cameraturnedoffautomatically.
Pleasedeletealloffirmwarefilesinsidetheexternalmemorycard.
If there is problem while upgrading firmware, please visit our nearest service center.