Samsung TL320 - Page 3

.G_~~ .. _~_n_~'!!_~r~ !Q ~Q_m_m_9_n q_lJ_~.~~'_9_n_~ _
You can easily solve most problems by setting shooting options.
There are more details about how to set shooting options in the CD version of the user manual.
m
:s
(C
-
_.
en
:::r
I
• This is caused by a reflection from the camera flash.
,. Set the flash option to <J) Red-eye or <§5 Red-eye Fix. (See the user manual p. 41)
,. If the photo has already been taken, select ~ Red-eye Fix in the edit menu.
(See the user manual p. 68)
· Dust particles floating in the air may be captured in photos when using the flash.
,. Turn off the flash or avoid taking photos in a dusty place.
• Set ISO speed options. (See the user manual p. 43)
The subject's eyes
appear red.
Photos have dust
spots.
Photos are blurred
when shooting at
night.
• This may be caused by taking photos in low light conditions or holding the camera incorrectly.
•• Use the (~UAL mode. (See the user manual p. 27)
•• Press [Shutter] halfway down to make sure the sUbject is focused.
(See the user manual p. 23)
..........................................................
As the camera tries to let in more light, the shutter speed slows.
This can make it difficult to steady the camera and may result in camera shake.
• Turn on the flash. (See the user manual p. 41)
Select Night in the SCN mode. (See the user manual p. 28)
• Set ISO speed options. (See the user manual p. 43)
• Use a tripod to prevent your camera from shaking.
Subjects come out • When the light source is behind the subject or when there is a high contrast between
too dark because of • the light and dark areas, the subject may come out shaded.
backlighting. •• Avoid shooting in front of the sun.
.• Select Backlight in the SCN mode. (See the user manual p. 28)
• Set the flash option to ~ Fill in. (See the user manual p. 41)
• Set the Auto Contrast Balance (ACB) option. (See the user manual p. 50)
•• Adjusrthe exposure. (See the user manual p. 50)
•• Set the metering option to [.] Spot if a bright subject is in the center of the frame.
(See the user manual p. 51)
" Photos are blurred.
•
EN-3
.G_~~ .. _~_n_~'!!_~r~ !Q ~Q_m_m_9_n q_lJ_~.~~'_9_n_~ _
You can easily solve most problems by setting shooting options.
There are more details about how to set shooting options in the CD version of the user manual.
m
:s
(C
-
_.
en
:::r
I
• This is caused by a reflection from the camera flash.
,. Set the flash option to <J) Red-eye or <§5 Red-eye Fix. (See the user manual p. 41)
,. If the photo has already been taken, select ~ Red-eye Fix in the edit menu.
(See the user manual p. 68)
· Dust particles floating in the air may be captured in photos when using the flash.
,. Turn off the flash or avoid taking photos in a dusty place.
• Set ISO speed options. (See the user manual p. 43)
The subject's eyes
appear red.
Photos have dust
spots.
Photos are blurred
when shooting at
night.
• This may be caused by taking photos in low light conditions or holding the camera incorrectly.
•• Use the (~UAL mode. (See the user manual p. 27)
•• Press [Shutter] halfway down to make sure the sUbject is focused.
(See the user manual p. 23)
..........................................................
As the camera tries to let in more light, the shutter speed slows.
This can make it difficult to steady the camera and may result in camera shake.
• Turn on the flash. (See the user manual p. 41)
Select Night in the SCN mode. (See the user manual p. 28)
• Set ISO speed options. (See the user manual p. 43)
• Use a tripod to prevent your camera from shaking.
Subjects come out • When the light source is behind the subject or when there is a high contrast between
too dark because of • the light and dark areas, the subject may come out shaded.
backlighting. •• Avoid shooting in front of the sun.
.• Select Backlight in the SCN mode. (See the user manual p. 28)
• Set the flash option to ~ Fill in. (See the user manual p. 41)
• Set the Auto Contrast Balance (ACB) option. (See the user manual p. 50)
•• Adjusrthe exposure. (See the user manual p. 50)
•• Set the metering option to [.] Spot if a bright subject is in the center of the frame.
(See the user manual p. 51)
" Photos are blurred.
•
EN-3