How to remove dotted line on Samsung TV screen?
If you see a dotted line on the edge of your Samsung TV screen, and Picture Size is set to Screen Fit, change it to 16:9. Also, try changing the cable/satellite box resolution.
Why does my Samsung keep powering off?
If your Samsung TV is powering off unexpectedly, check if Sleep Timer (System > Time > Sleep Timer) has been enabled. If the Sleep Timer is off, check if No Signal Power Off (System > Eco Solution > No Signal Power Off) or Auto Power Off (System > Eco Solution > Auto Power Off) are enabled.
What to do if there is picture but no sound on Samsung ?
If your Samsung TV picture is good but there is no sound, first, navigate to Sound settings and set Speaker Select to TV Speaker. If you're using an external device, check its audio output options. Also, if you're using a DVI to HDMI cable, remember that a separate audio cable is required. Finally, if your TV has a headphone jack, ensure nothing is plugged into it. If all else fails, try rebooting the connected device by disconnecting and reconnecting its power cable.
What to do if Samsung speakers are making odd sounds?
If your Samsung TV speakers are making an odd sound, first ensure that the audio cable is connected to the correct audio output connector on the external device. If the issue persists, it could be due to a low signal level, which can cause sound distortions. To address this, run Self Diagnosis (Support > Self Diagnosis > Sound Test).
How to fix flickering on Samsung ?
If your Samsung TV has flickering and dimming issues, try disabling Energy Saving features. Go to System > Eco Solution and disable Eco Sensor and/or Energy Saving, then check if the issue is resolved.
How to adjust brightness on Samsung TV?
To adjust screen brightness on your Samsung TV, navigate to Picture settings and adjust Backlight/Cell Light (if applicable), Contrast, Brightness, Sharpness, Color, Tint (G/R), and other picture quality settings.
How to troubleshoot screen color issues on Samsung TV?
If your Samsung TV has component connections or screen color issues, run Self Diagnosis by navigating to Support > Self Diagnosis > Picture Test. Also, check if the TV's video input connectors are correctly connected to the external device's video output connectors. If using a component cable, ensure the Pb, Pr, and Y jacks are plugged into their proper connectors.
How to fix blur with Auto Motion Plus on Samsung ?
To correct Auto Motion Plus or blur issues on your Samsung TV, use the Auto Motion Plus feature found under Picture > Picture Options > Auto Motion Plus.
Why Samsung cannot recognize USB device?
If your Samsung TV cannot recognize the USB device or is failing Format Device, Check Device, and Device Performance Test, refer to the USB device's manual to see if data can be stored on it. Also, check if the USB device is in a locked state, if it was formatted when connected to a computer, or try using a different USB device.
How to fix wireless network connection failed on Samsung ?
If the wireless network connection failed on your Samsung TV, make sure the TV is connected to a wireless IP router.
To Next Page
General
