19
Removing the Stand
―
Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
―
The exterior may differ depending on the product.
1
2
3
4
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
If Styrofoam is unavailable, use a thick sitting mat.
Unfasten the 2 screws at the bottom of the stand
neck.
Lift and remove the stand in the direction of the
arrow as shown in the figure.
Remove the stand neck from the stand base by
pulling it in the direction of the arrow as shown in
the figure.
- Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
To Next Page
Loading...
