3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
WARNING
This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
CAUTION
Disconnect the LED TV from the power source before disassembly.1.
Follow these directions carefully; never use metal instruments to pry apart the cabinet.2.
3-1-1. TV
Description Picture Description Screws
1
Place TV face down on cushioned table.
2
Remove 4 screws from the BRACKET-
STAND,SUPPORT-R/L.
Torque :
7~ 8Kgf.cm.
6003-001321
3
Remove ASSY STAND P-BASE.
CAUTION
Becareful when you remove ASSY
STAND P-BASE, It could be sharp as
a metal parts.
To Next Page
Loading...
