◀ ◀▶
English
■
Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
2. Select the WPS(PBC).
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network.
4. The network test screen appears, and
network setting is done.
● The displayed menu may differ depending on the
model.
Network Setting
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless (general)
WPS(PBC)
One Foot Connection
Connect to the Access Point
easily by pressing the WPS(PBC)
button. Choose if your Access
Point supports push button
Configuration(PBC).
To Next Page
Loading...
