◀ ◀▶
English
3. Select Ad hoc. The message “Ad hoc service supports a direct connection
with Wi-Fi compatible devices like a cell phone or PC. Other network
services may be limited. Do you want to change the network connection?” is
displayed.
4. Select OK, and press ENTER
E
. The TV searches for the mobile device.
5. When the TV finishes searching for your mobile device, input the generated
Network Name (SSID) and Security Key into the device you want to connect and
then connect to the network.
N
If network does not operate normally, check the Network Name (SSID) and
Security key again. An incorrect Security key may cause a malfunction.
N
If a device is connected once, it is displayed in the Network Setting list. When
you connect to it again, you can find it in the List.
To Next Page
Loading...
