◀ ▶
English
How to set up using Plug & Access function
Turn on the power of wireless router and TV.
1. Insert USB memory stick into our Samsung wireless router and checking wireless
router LED status (Blinking
→
On).
2. Then take USB memory out and insert it into Samsung TV.
3. Wait until the connection is automatically established.
N
If Plug & Access does not connect your TV to your wireless router, a pop-up
window appears on the screen notifying you of the failure. If you want to try
using Plug & Access a gain, reset the wireless router, disconnect the Samsung
Wireless LAN adapter and then try again from Step 1. You can also choose one
of the other connection setup methods.
To Next Page
Loading...
