◀ ▶
English
Issues Solutions and Explanations
RF (Cable / Antenna) Connection
The TV is not receiving all
channels.
•
Make sure the Antenna cable is connected securely.
•
Please try Plug & Play (Initial setup) to add available channels to the
channel list. Go to MENU - System - Plug & Play (Initial setup) and wait
for all available channels to be stored.
•
Verify the Antenna is positioned correctly.
PC Connection
A “Mode Not Supported”
message appears.
•
Set your PC’s output resolution so it matches the resolutions supported
by the TV.
To Next Page
Loading...
