◀ ◀▶
English
●
LNB Settings: Configures the outdoor equipment.
–
Satellite: Selects the satellite for receiving digital broadcasts.
–
Transponder: Selects a transponder from the list or adds a new
transponder.
–
DiSEqC Mode: Selects DiSEqC mode for the selected LNB.
–
Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.
–
Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.
–
Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the
LNB type. For a universal LNB it should be Auto.
–
Signal Quality
for LED TV
: Display the current status of broadcasting signal.
To Next Page
Loading...
