Order Description
4 Push the 'Auto Program' Button.
(It takes about 15 seconds.)
5 If update completes,
TV set will booting automatically.
Disconnect the JIG.
4-7-2. Sub S/W (in Factory mode)
If you don't have DDC Manager, Use this method.
Into the Factory Mode. 1.
Select "SVC". (Use 2. r button.)
Select "MICOM UPGRADE off". (use 3. r button.)
If message change from "off" to "wait", TV is upgrading Sub S/W. (It takes about 5 min.)4.
If update completes, TV set will booting automatically.5.
www.freeservicemanuals.info
Digitized in Heiloo Netherland
To Next Page
Loading...
