EasyManua.ls Logo

Samsung UE32D55-R Series - Page 32

Samsung UE32D55-R Series
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-27
2. Product specications
Other Restrictions02.
N NOTE
If there are problems with the contents of a codec, the codec will not be supported.
If the information for a Container is incorrect and the le is in error, the Container will not be able to play correctly.
Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in
the table above.
If the Index Table is in error, the Seek (Jump) function is not supported.
You may experience le stuttering while playing a video through a network connection.
Video Decoder Audio Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.
XVID, MPEG4 SP, ASP:
– Below 1280 x 720: 60 frame max
Above 1280 x 720: 30 frame max
GMC is not support.
Supports up to WMA 7, 8, 9, STD, 9 PRO
WMA Lossless, Voice Lossless, Voice is not supported.
WMA sampling rate 22050Hz mono is not supported.
Playing movie le continuously (Resume Play)03.
If you exit the playing Videos function, it can be played later from the point where it was stopped.
N The Resume function does not support multiple users. (It will have only memorised the point where the most
recent user stopped playing.)
Select the movie le you want to play continuously by pressing the 1. l or r button to select it from the le list
section.
Press the 2. (Play) / ENTERE button.
A triangle icon will appear on the progress bar when the playback starts.
Press the 3. TOOLS button, and then select Resume. The Movie will begin to play from where it was stopped.
Using the 04. Scene Search function
If you want to use the Scene Search function during playback, you can explore scene divided in to 5 chapters you
want.
N If the index information is damaged or unsupported, you will not be able to use the Scene Search function.
Select the movie le you want to play from the le list 1.
section.
Press the 2. (Play) / ENTERE button.
Press the 3. TOOLS button, and then press the l or r button
to select Scene Search. A pop up window appears.
Press the 4. l or r button to select a scene you want search.
The playback will start from the selected scene.
For LED 5500 series
www.freeservicemanuals.info
4/30/2017
Digitized in Heiloo Netherland

Related product manuals