No Video (Analog PC signal)
Symptom
Audio is normal but no picture is displayed on the screen. -
Major
checkpoints
Check the PC source -
Check the Arsenal, Check the Main Chipset. -
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. -
Diagnostics
Does the signal appear at
PIN - R, G, B, HS, VS (R, G, B, H, V) ?
Does the digital data appear at
TP-E_TXCLK+, E_TXCLK- ,
O_TXCLK+, O_TXCLK- ?
Yes
Yes
Yes
Yes
Check a set in the 'Stand-by mode'
or 'DPMS mode'
Input the analog PC signal properly.
Please, Contact Tech support.
Check CN401, PC cable.
Change the Main Assy.
Check IC1001 (X6).
Change the Main Assy.
No
No
No
No
No
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Check the PC source and
check the connection of D-SUB ?
Check the LVDS cable?
Check the T-Con B'd?
Replace the LCD panel?
1
2
Caution Make sure to disconnect the power before working on the IP board.
www.freeservicemanuals.info
Digitized in Heiloo Netherland
To Next Page
Loading...
