Description Picture Description Screws
6
Remove the screws of Main Board and
SMPS Board.
Remove the 4 screws of Main Board.•
Remove the 3 screws of SMPS Board.•
NOTE
If you need, Side Bracket also.•
If you want to change the only Panel, •
you don`t need to separate Boards
and cables (except LVDS).
6001-002756
(Machine)
7
Lift up the Panel.
NOTE
If you re-assemble, you should keep the
stop-point.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
To Next Page
Loading...
