Samsung UE32EH5 SERIES - Factory Mode Settings and Calibration

4-3-1. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF Info MENU MUTE Power On
If you have Factory remote control•
INFO Factory
If you don’t have Factory remote control, can’t control some menus. (Expert, Advanced menu)•
Option
Control
SVC
Expert
ADC/WB
Advanced
T-MST0DEUC : SW Ver
T-MST0DEUS : SW Ver
EDID : SUCCESS
HDCP : SUCCESS
CALIB : AV / COMP / PC / HDMI /
OPTION:**
FactoryCS:*********
T-MSXDEUCIP-****
Onboot : ***
SDAL-****
RFS:Mstar-X9 ****
20**-**-**
How to enter the hidden factory mode.•
Into the factory mode.1.
Move the tap to Advanced.2.
Key input : 0 + 0 + 0 + 0.3.
NOTE
hidden menu : Advanced
4-8
4. Troubleshooting
4-3. Factory Mode Adjustments