English - 15
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be
inserted.
- If you don’t insert the “CI or CI+ CARD”, some
channels will display the “Scrambled Signal”
message.
- The pairing information containing a telephone
number, the “CI or CI+ CARD” ID, the Host ID, and
other information will be displayed in about 2~3
minutes. If an error message is displayed, please
contact your service provider.
- When the configuration of channel information has finished, the message “Updating
Completed” is displayed, indicating the channel list is updated.
NOTE
- You must obtain a “CI or CI+ CARD” from a local cable service provider.
- When removing the “CI or CI+ CARD”, carefully pull it out as dropping the “CI or CI+ CARD”
may damage it.
- Insert the “CI or CI+ CARD” in the direction marked on the card.
- The location of the COMMON INTERFACE slot may differ depending on the model.
- A “CI or CI+ CARD” is not supported in some countries and regions, therefore, check with
your authorised dealer.
- If you have any problems, please contact a service provider.
- Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be
distorted or will not be visible.
[UH6410-XU]BN68-06068F-02ENG.indb 15 2014-05-13 9:54:00
To Next Page
Loading...
