- 75 -
Adjusting the Sound Quality
Change the Sound Mode and adjust Expert Settings.
Choosing a sound mode
Settings Sound Sound Mode Try Now
You can select a favourite sound mode suitable for the content type or the listening environment.
● Standard
● Optimised
● Amplify
Configuring advanced sound settings
Settings Sound Expert Settings Try Now
You can personalise the sound quality by adjusting the following settings.
● Balance Try Now
● Equaliser Try Now
● HDMI Input Audio Format Try Now
● Digital Output Audio Format Try Now
" If you use a receiver that does not support Dolby Digital Plus, you will hear no sound if you select Dolby Digital+.
● Audio Delay Try Now
● Sound Feedback Try Now
● Reset Sound Try Now
" Standard audio signals are sampled at 48 kHz while HD audio signals are sampled at 96 kHz.
" Some S/PDIF receivers may not be compatible with HD audio format.
" If you want to use the volume control of a connected source device to control the sound, deactivate Auto Volume.
When you use Auto Volume with a source device, the device's volume control may not function properly.
To Next Page
Loading...
