English - 7
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the POWER
P
button. Plug & Play is available only when the Input source is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
✎
The option may differ depending on country.
1
Selecting the OSD
Language
Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Setting up the Network
Set up your network connection. Press the ENTER
E
button to start. If
you do not know your network set up information or want to set to it later,
select Skip. We suggest you skip network connection setup now and refer
to “Network menu” in the e-Manual for set up requirements and instructions,
and the Network Connection section of this manual (Page 13).
You can set up the network connection later using the Network menu.
3
Software upgrade When network connection settings are complete, Software Upgrade is
available. Select Next to upgrade TV software. Your TV will automatically
upgrade, if your TV need a software upgrade. If you want to upgrade
later, select the Skip. For more information, refer to "Software Upgrade"
(Preference → Support) in the e-Manual.
✎
This may take some time, depending on network status.
4
Selecting the usage mode
Press the ▲ or ▼ button to select Home Use, and then press the
ENTER
E
button twice.
Select the Home Use mode. Store Demo mode is for retail environments.
5
Selecting a country
(Depending on the country)
Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the appropriate country.
✎
After selecting the country in the Country menu, some models may
proceed with an additional option to setup the pin number.
✎
When you input the PIN number, “0-0-0-0” is not available.
✎
The option may differ depending on country.
6
Setting the Clock Mode Set the Clock Mode automatically or manually.
7
Selecting search options
for auto tuning
Press the ▲ or ▼ button, then press the ENTER
E
button. Select the
channel source to memorise. When setting the antenna source to Cable, a
step appears allowing you to assign numerical values (channel frequencies)
to the channels. For more information, refer to Channel - Memorising
Channels - Auto Tuning.
✎
When Aerial or Cable is selected first: After all Aerial or Cable channels
are stored, the step for storing Satellite channels is displayed.
✎
When Satellite is selected first: After all Satellite channels are stored, the
step for storing Aerial or Cable channels is displayed.
✎
Press the ENTER
E
button at any time to interrupt the memorisation
process.
8
Enjoy your TV. If you want to watch a broadcast program, select Close. If you want to enjoy
the Smart Hub, select the Smart Hub. The Smart Hub will start. For more
detailed information, refer to “Smart Hub” in the e-Manual.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play (MENU → System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
[UD6500-XE]BN68-03482G-01L05.indb 7 2011-05-09 오후 3:51:25
To Next Page
Loading...
