2-4-4. Universal Remote Control Setup
This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theatres, and
other third-party external devices connected to the TV using the TV's remote control.
NOTE
Some or new models of the external device connected to the TV, may not be supported the Universal remote setup.
English - 8
Universal Remote Control Setup
This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home
theatres, and other third-party external devices connected to the TV using the TV's remote control.
✎
Some or new models of the external device connected to the TV, may not be supported the
Universal remote setup.
Keep a distance of 5 cm at least between the IR Extender and the external device, as the illustration
shows. Face the IR Extender toward the external device’s remote control signal receiver. Note that it should
be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with
the transmission of the remote control signal.
Add the External Device
1. Turn on the external device you wish to set up universal remote function for and then press SOURCE
to bring up the Source screen.
2. Select Universal remote setup from the top of the screen. This initiates the universal remote setup
process.
3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the
remote control by entering the model number manually.
[UF6300-XC]BN68-04881A-LPRL4.indb 8 2013-06-03 9:00:29
Keep a distance of 5 cm at least between the IR Extender and the external device, as the illustration shows. Face the
IR Extender toward the external device’s remote control signal receiver. Note that it should be no obstacle between IR
Extender and external device. The presence of an obstacle will interfere with the transmission of the remote control
signal.
Add the External Device
Turn on the external device you wish to set up universal remote function for and then press 1. SOURCE to bring up the
Source screen.
Select 2. Universal remote setup from the top of the screen. This initiates the universal remote setup process.
Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote control by 3.
entering the model number manually.
To Next Page
Loading...
