Description Picture Description Screws
6
Disconnect the ASSY BOARD P-JOG
SWITCH & IR Cable.
NOTE
First remove the cable before you
remove the ASSY COVER P-MIDDLE,
REAR.
ASSY BOARD P-JOG SWITCH & IR Cable
7
Remove the ASSY COVER P-MIDDLE,
REAR.
8
Remove the Power Cables and Speaker
Cables.
Remove the LVDS Cable and Panel
Drive Cable.
NOTE
Applied to Double locking.
Flip up the locking tab on top of the 1.
connector.
Squeeze the edge of the connector 2.
to release the second tab lock and
gently pull the connector away.
Speaker Cable
Power Cable
Power Cable
LVDS Cable
LVDS Cable
Panel Drive Cable
9
Remove the screws of ASSY PCB
MAIN.
Torque :
7~8Kgf.cm.
100~113psi
6001-002756
SCREW-MACHINE
M3.0, L6.0 WHT
To Next Page
Loading...
