Samsung UE65KS9502T - Page 8

3-4
3. Disassembly and Reassemble
Description & Screws Picture Description
11
Remove the Cables.
• LEAD CONNECTOR-DIMMING(
A
)
(LD - MAIN - FT)
• LEAD CONNECTOR-POWER(
B
)
(SMPS - LD)
• LEAD CONNECTOR-POWER(
C
)
(SMPS - MAIN)
A
B
C
12
Remove the FFC CABLE
A
(Main-T-CON VX1),
B
(BLU/Dimming),
C
(Open Cell USIT).
• FFC CABLE(
A
)
(Main - T-CON)
A
B
C
13
Remove the ASSY SMPS P-PD BOARD (LD
Board).
Gently lift out 4 corners of the board to •
release its locks.
Use both hands to hold the board and slide it •
toward the upper side to remove. (It's easier
foryoutousebothhands-amiddlenger
for upper side and a thumb for bottom side
to lift and slide out simultaneously)
NOTE
When installing the ASSY SMPS P-PD
BOARD(LD Board), verify the board is properly
positioned in all 4 mounting slots(
).
BottomchassisGuidethexingHoles
Locking
1
1
2
2