Samsung UN HU7250F Series - Entering Factory Mode

4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF INFO MENU MUTE Power On
If you have Factory remote control•
INFO Factory
Some items are not available without a factory remote.•
Option
Control
Debug
SVC
ADC/WB
Advanced
T-NT14UAKUC-xxxx
T-NT14UAUSS-xxxx
BT Version : xxxx
E-Manual : xxxx
Camera Version : xxxx
Blaster-version : ----
EDID SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : xxxx,US,72xx,NONE
DTP-SDAL-NT14U-ATSC-xxxx-xxxx
RFS : "NT14U 0166" K/0 201x-xx-xx
KERNEL : 159.1250, / Onboot : 0100.1
DTP-DTVTD-4631-0028
Backend[NT72324]: FW[0xx] Ldc[0xx]
TCON Version : ----
Model : UN55HU72xx
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI : ATH6KL(5.0.0.99_0522)
CO Nf/ W/ M/ D/ HO PO AO / S/ N/
Factory Data Ver : 220 / EERC Ver : 97
SmartControl : xxxx
DTP-BP-HAL-4631-NT14U_ATSC-016
DTP-BP-MW-4631-18
DTP-BP-APP-4631-02-19
POP-FLA-14-UHD_FLAT-014
Date of purchase : mm/dd/yyyy
Main SW Version
Sub Version (Main, Jak)
Bluetooth Version
E-Manual Version
Camera Version
IR Blaster Version
4-26
4. Troubleshooting