Samsung UN KU650DF Series - Page 7

3-3
3. Disassembly and Reassemble
Description Picture Description
5
After pushing on coloured points of the
rear cover (in weight less than 10kg) and
inserting a Samsung service jig at holes
of Rear cover's bottom corners, lift up the
rear cover from bottom corners using the
service jig to release the hooks along both
sides of the rear cover.
Then, holding both sides of the rear cover
by hand and releasing the rest hooks on
the upper side of the rear cover, remove it.
All hooks' locations are indicated by Yellow
Circles in the picture.
(Side:8 points / Top:6 points
CAUTION
When you remove the rear cover, hooks
on the upper side of the Chassis Front
can be released. you should check it
before reassembling.
Jig Jig
6
Remove the Speakers and Speaker Cable.
AlsoRemovetheBT/Wimodule,Function
module and Cable of each module.
Speaker
BT/Wimodule
Function module