3-5
3. Disassembly and Reassemble
Description Picture Description
9
Removing Main board.
Gently lift the top right corner of the •
board out to release the lock.
Use both hands to hold the board and •
slide to the left to release it.
CAUTION
When installing the Main board, verify
the board is properly positioned in all 4
mounting slots
1
2
Lift out of locks (top right corners) to release
Slide it out toward the left side to remove the board
* Panel
- Rear Side
CAUTION
Always remember to disconnect the Power Cord before assembling or disassembling the LED TV.1.
Always take precautions and follow the steps properly. Remember to take a picture before 2.
disassembling if possible.
Recommeded screwdriver torque : 22.0 ~ 26.5lbf3.
The torque may need to be adjusted accordingly. -
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
To Next Page
Loading...
