3-10
3. Disassembly and Reassemble
Description & Screws Picture Description
12
4. Use Open Jig in notch to help release &
smoothly slide SMPS to the Right. (While
pushing BLU Tab & Releasing Lock Tab)
5. Gently lift the 1 edge to unlock the SMPS
board.
Mounting slots (5EA)
Fixing Hole
Lift up (2EA)
Locking
Remove the board by holding it with both
hands and sliding it to the Right ( ).
Slide to the right to release the board
11
Completed the disassembly.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
To Next Page
Loading...
