Unzip the downloaded le and store it in your USB drive top folder.
Unzip the downloaded le and store it in your USB drive top folder.
Insert the USB device into the USB slot on the back of your TV or the side of the One Connect Box.
- 197 -
12. UnzipthedownloadedleandstoreitinyourUSBdrivetopfolder.
Unzip the downloaded le and store it in your USB drive top folder.
Unzip the downloaded le and store it in your USB drive top folder.
Insert the USB device into the USB slot on the back of your TV or the side of the One Connect Box.
- 197 -
13. Insert the USB device into the USB slot on the back of your TV or the side of the One Connect Box.
Unzip the downloaded le and store it in your USB drive top folder.
Unzip the downloaded le and store it in your USB drive top folder.
Insert the USB device into the USB slot on the back of your TV or the side of the One Connect Box.
- 197 -
14. Thermwareupdatebeginsautomatically.YourTVwillautomaticallypowercyclewhenthermwareupdateis
completed.DonotturnoffyourTVwhilethermwareupdateisinprogress.
The rmware update begins automatically. Your TV will automatically powercycle when the rmware update is
completed. Do not turn off your TV while the rmware update is in progress.
After your TV turns on, select Settings Support About This TV and check the new rmware version.
After your TV turns on, select Settings Support About This TV and check the new rmware version.
- 198 -
4-63
4. Troubleshooting