Why do I see small particles on the edge of my Samsung LED TV frame?
Seeing small particles when closely inspecting the edge of the frame of your Samsung LED TV is part of the product’s design and is not a defect.
What to do if my Samsung UN22D5000NF LED TV has no picture?
If there is no picture on your Samsung LED TV, start by checking all cable connections by removing and reconnecting them to both the TV and any external devices. Ensure that the video outputs of your external devices (like Cable/Sat Box, DVD, Blu-ray players) match the TV input connections. Verify that all connected devices are powered on. Finally, select the correct source on your TV using the SOURCE button on the remote control and try rebooting the connected device by reconnecting its power cable.
Why does my Samsung LED TV keep turning off by itself?
If your Samsung LED TV turns off automatically, ensure the Sleep Timer is set to Off in the System menu. If a PC is connected, check its power settings. Make sure the AC power cord is securely plugged into the wall outlet and the TV. When watching TV programs from an antenna, the TV will turn off after 10 - 15 minutes if there is no signal.
Why isn't my Samsung UN22D5000NF remote working?
If the remote control for your Samsung LED TV is not working, first replace the batteries, ensuring they are inserted with the correct polarity (+ and -). Clean the transmission window located on the top of the remote. Try pointing the remote directly at the TV from about 5 to 6 feet away.
How to remove POP ads from my Samsung UN22D5000NF?
If a POP (TV’s internal banner ad) appears on the screen of your Samsung LED TV, select Home Use under Plug & Play mode. Refer to Plug & Play (Initial Setup) for details.
Why does my Samsung UN22D5000NF LED TV keep losing audio and video?
If you experience intermittent loss of audio or video on your Samsung LED TV, check the cable connections and reconnect them. The issue can also be caused by using overly rigid or thick cables; ensure the cables are flexible enough for long-term use. If mounting the TV to the wall, using cables with 90-degree connectors is recommended.
Why does my Samsung UN22D5000NF reset settings automatically?
If your settings on Samsung LED TV are lost after 30 minutes or every time the TV is turned off, it may be in Store Demo mode, which resets audio and picture settings every 30 minutes. Change from Store Demo mode to Home Use mode using the Plug & Play procedure: Press the SOURCE button to select TV mode, then go to MENU ? System ? Plug & Play ? ENTER.
Why is the caption option greyed out on my Samsung UN22D5000NF?
If the Caption option is greyed out on the TV menu of your Samsung LED TV, it is because you cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component. Caption must be activated on the external device.
What does 'Mode Not Supported' mean on my Samsung LED TV?
If a “Mode Not Supported” message appears on your Samsung LED TV, set your PC’s output resolution to match a resolution supported by the TV.
What to do if Samsung UN22D5000NF LED TV picture freezes when changing channels?
If the picture freezes, is distorted, or delayed when changing channels on your Samsung LED TV, and the TV is connected to a cable box, try resetting the box by disconnecting and reconnecting the AC cord and waiting for it to reboot (this may take up to 20 minutes). Also, set the output resolution of the cable box to 1080i or 720p.
Details VESA mount standards, screw types, and installation guidelines.
Guides through language, mode, clock, tuning, and channel setup.
Instructions for connecting devices via HDMI for HD picture quality.
Provides solutions for common TV problems like no picture or remote issues.
Steps to diagnose and resolve poor picture quality issues.
Instructions for using anti-fall devices for TV safety.
Selects preset picture adjustments for different viewing conditions.
Steps to configure PC video settings for optimal TV display.
Fine-tunes picture quality parameters like black tone and contrast.
Setting up PIN and program rating locks for content control.
Optimizes TV for gaming experience by adjusting picture and sound.
Explains upgrading via USB, Internet, or Standby Mode.
Enables control of connected Samsung devices via HDMI.
Details VESA mount standards, screw types, and installation guidelines.
Guides through language, mode, clock, tuning, and channel setup.
Instructions for connecting devices via HDMI for HD picture quality.
Provides solutions for common TV problems like no picture or remote issues.
Steps to diagnose and resolve poor picture quality issues.
Instructions for using anti-fall devices for TV safety.
Selects preset picture adjustments for different viewing conditions.
Steps to configure PC video settings for optimal TV display.
Fine-tunes picture quality parameters like black tone and contrast.
Setting up PIN and program rating locks for content control.
Optimizes TV for gaming experience by adjusting picture and sound.
Explains upgrading via USB, Internet, or Standby Mode.
Enables control of connected Samsung devices via HDMI.
General| Screen Size | 22 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Type | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Built-in Wi-Fi | No |
| Smart TV | No |
To Next Page